These photos are examples of Physical Layer work I've done. Some customers needed to have their cabling and racks re-worked

Here is the finished rack. The goal was to improve looks and manageability. Note that all switch port status lights are now visible

This rack is in a major financial company downtown Dever. Here is the rack before I began repair. There are a total of four separate companies distributed in this system

Here is a closer view of the task ahead

This is the back side. Note decomissioned Token Ring cable on the rack and under the floor

Here is the finished rack. Companies are color coded, all switch ports and panel jack connections are documented. The rats nest remaining on the bottom right is telecom, which was not part of the project

Here is the back of the finished rack. Incoming circuits are color-coded to identify T1, ISDN, Frame Relay etc

Note the color coding

This is the wall behind the rack. I reworked all the feeds from biscuit to the rack.

This is a new installation. I cabled the office, assembled and mounted the rack at top right, installed and turned up the equipment

Close up of the finished rack

Another angle

This was a new satellite office for a customer. A contractor cabled the office and left off here

PBX is in place

WAN rack is in place

WAN rack is cabled. Note music on hold on the back panel on the right

Front of rack with door open

Completed job. Telecom was scheduled to deal with the one cable left hanging